Datasheet (PDF 87KB)
User Manual(Multilanguage) (PDF 365.9KB)
The Negative Ground makes it much easier to use in vehicles and easier to understand for people used to working with vehicle systems. A rugged new bus uses the MODBUS protocol (industrial automation standard proven in noisy environments). It is compatible with Modular System Components. This gives unprecedented flexibility in system design.
More Data Storage. 512 days worth of data can be stored. That’s 16 Months worth of Charge and Load Ah, Battery voltage range, and daily State of Charge. Data for 99 days is accessible via the display so if you don’t have a computer, you’re not locked out.
LED backlighting makes the display readable in any light conditions.
Hidden Wiring. All the wires are covered. Wiring to the unit can be kept out of sight inside the wall obehind the mounting panel. This makes for a clean installation.
Generator Terminals. Voltage free contacts, as required by many generator start systems, are now included in the basic controller.
|Nominal Voltage:||12,24,32,36,48 V|
|Max. Solar Panel Current:||20 A|
|Max. Load Current:||20 A|
|Regulation Set Points:
||4 pre-set programs or user adjust|
|Ambient Temperature Range:||-20°C to 55° C|
|Max. Wire size:||16mm2 (6 AWG)|
|Self consumption:||9 mA @ 12 V, max 26 mA @ 60 V|