All Charge Controllers

Downloads

  • Maximum Power Point Tracking technology increases the efficiency of your PV system
  • Less expensive solar-panels for gridfeed-in systems can now be used for 12/24 V off-grid systems
  • Electronic protection (reverse polarity, over-current, short-circuit, overtemperature)
  • High efficiency
  • DIN Rail compatible
  • Negative ground
  • With innovative maximum-power-tracking technology, Phocos‘ MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions. The MPPT can yield an energy gain from your PV array (up to 30%).
  • MPPT includes a sweep-function which runs through the whole solar-panel voltage range once every 2 h to find the point of the absolute maximum power output. Thetemperature-compensated three-stage I-U curve charge regulation alogarithm significantly extends the lifespan of your battery.
  • The possibility to use less expensive grid-feed-in solar- panels with up to 95 V open circuit voltage for 12 V or 24 V stand-alone systems will significantly reduce the cost of the total system.
Type MPPT 100/20
Nominal voltage 12/24 V, automatic recognition
Max. solar input voltage Voc 95 V
Max. PV input power 300 W@12 V, 600 W@24 V
Max. battery charge current 20 A
Power conversion efficiency up to 97%
Standby power consumption <30 mW at 12 V system voltage(< 2 mA)
<80 mW at 24 V system voltage(< 3 mA)
Temperature compensation –4 mV/cell*k
Max. wire size 35 mm2
Dimensions (W xH x D) 185 x 150 x 115 mm
Weight 1.6 kg
Temperature range –40 to +50 °C
Type of protection IP22