All MPM system
  • Maximum Power Point Tracking technology increases the efficiency of your PV system
  • Less expensive solar-panels for gridfeed-in systems can now be used for 12/24 V off-grid systems
  • Electronic protection (reverse polarity, over-current, short-circuit, overtemperature)
  • High efficiency
  • DIN Rail compatible
  • Negative ground
  • With innovative maximum-power-tracking technology, Phocos‘ MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions. The MPPT can yield an energy gain from your PV array (up to 30%).
  • When a Central Unit is used, up to 8 MPPTs can be used together in one system. The charge regulation is then done via data bus by the Central Unit. This will enable you to increase your system capacity substantially.
  • The temperature-compensated three-stage I-U curve charge regulation alogarithm significantly extends the lifespan of your battery.
  • Thanks to the maximum power point technology, lower cost modules, intended for grid connected applications (up to 95 V open circuit voltage), can now be used resulting in attractive system cost savings.
Type MPPT 100/30
Nominal voltage 12/24 V, automatic recognition
Nominal battery charge current 30 A
Max. PV voltage 95 V
Min. PV voltage 17/34 V
Max. PV input power 450 W@12 V, 900 W@24 V
Max. battery charge current 33 A
Power conversion efficiency up to 98%
Standby power consumption < 30 mW at 12 V system voltage(< 2 mA)
< 80 mW at 24 V system voltage(< 3 mA)
Temperature compensation –24 mV/K (12 V ); –48 mV/K (24 V )
Max. wire size 35 mm2
Dimensions (W xH x D) 185 x 150 x 115 mm
Weight 1.6 kg
Temperature range –40 to +50 °C
Type of protection IP22
Float charge 13.8/27.6 V (25 °C)
Main charge 14.4 V/28.8 V (25 °C), 0.5 h (daily)
Boost charge activation 14.4/28.8 V (25 °C), 2 h battery voltage < 12.3/24.6 V
Equalization activation 14,8/29,6 V (25 °C), 2 h battery voltage < 12.1/24.2 V
Max. battery voltage 32 V
Grounding Negative grounding
Battery type Lead (GEL, AGM, float)