Software & Firmware

Main Body (U1) 58.03

• Modified the Maximum charge current for Host & Client (80A – 120A)
• Modified the maximum AC charge current limit for the client (80 – 120A)

Display Unit (U2) 6.29:

• Improvement to inverter communication

Main Body (U1) 41.03:

• Add “ANY” battery type support from remote display v06.29
• Compatibility improvements for ANY-CELL closed loop comms
• Must be used with display version 06.29 for ANY-CELL improvements to take effect

Display Unit (U2) 6.29:

• Improvements for remote settings commands from AB-PLC-CAN

Main Body (U1) 30.17:

• New battery type “ANY” for Any-Cell
• Menus 12, 13, 29, 30 now in SOC% for lithium batteries
• Improved and optimized Any-Cell charge algorithm control

Display Unit (U2) 6.27:

• Adds the “ANY” battery type for Any-Cell batteries
• Changes menus 12/13/29/30 to SOC % for lithium batteries

Main Body (U1) 51.05:

• Increase the maximum achievable charge voltage to 64V

Display Unit (U2) 106.21:

• After sending the BMS query command, reduce RX interrupt time from 10ms to 1ms for more BMS brand compatibility

Main Body (U1) 31.05 :

• Increase the maximum achievable charge voltage to 32V

Display Unit (U2) 106.21:

• After sending the BMS query command, reduce RX interrupt time from 10ms to 1ms for more BMS brand compatibility

Main Body (U1) 60.22:

• Modify SOC calculation for more accurate battery SOC
• Turn on inverter to regulate Bus voltage if only utility connected to avoid F08 error
• Add lithium battery wakeup function

Display Unit (U2) 106.21:

• After sending the BMS query command, reduce RX interrupt time from 10ms to 1ms for more BMS brand compatibility