Not from Phocos, but maybe from the thin film module manufacturer. The Any-Grid PSW-H allows you to have any grounding configuration you would like on the battery but you are not permitted to ground the positive or negative terminal of the PV side. If your thin film PV module manufacturer
If you are working with a 3-phase system and at least 3 Any-Grid PSW-H systems, as soon as one of the phases goes out of speck, all three PSW-H systems will automatically switch to Off-Grid mode.
If you use more than one Any-Grid PSW-H unit then each one will handle its own PV array and the PV modules may not be inter-connected between more than one unit. So if you are multiplying the number of devices you are also multiplying the number of MPPT’s and the MPP trackers
Yes, it can. Be sure that on the AC input side you are always connected to one neutral and one live wire though, never just two live wires of two phases on a single unit.
es, see the links below for certain lithium battery manufacturers supported in terms of a BMS (battery management system) communication link with the battery.We have very many different battery settings and as long as your battery has 48 ~ 50 Vdc nominal voltage, you can modify the settings of the
Get important Energy Access information and insights straight to your inbox
SIGN ME UPGet important Energy Access information and insights straight to your inbox
